Brake removal

It doesn't seem like a lot, but the brake pedal support came off with barely a fight sans one screw.  Major accomplishment.

The hydraulics mounted to the upper left in a pedal box

These hung off the pedal box and through the hole.  Meet clutch and brake, wire wheeled clean and ready to paint
 

This is the brake distributor/ pressure failure switch light block. 
The left side hosts the rear master cylinder hose, the right central side divvies
up the front master cylinder that goes up and down to each front brake.
(front lower fought tooth and nail not to come out)
The middle port hosts the failure switch, the lower is the mount. to the fender.